Busbar Trunking System

Product / Busbar Trunking System

EAE E-LINE BUSBAR

With their modular configuration, EAE E-Line Busbar energy distribution systems meet all power requirements in modern enterprises and buildings. Alterations in layouts, addition of machinery, and provision of power at various points can be achieved without disrupting the operational parts of the facility.
Power is distributed via isolated bars within a sheet metal or aluminum enclosure and is safely distributed using tap-off boxes which can be plugged in and out safely from tap-off outlets along the length of the busbar without interrupting the power supply to other equipment supplied by the same busbar.
E-Line Busbars, which have international test certificates, can be expanded, replaced, moved or reused whenever necessary. It is very easy, economical and safe to take power using tap off boxes placed anywhere along the busbar route.

Busbar Current Carrying Capacities

  • Busbar MV: Provides transfer and distribution of energy in the current levels between 950A and 5700A (Medium Voltage Busbar: Protection with metal over cast resin). Conductors are made of aluminum or electrolytic copper as per choice.
  • Busbar KX: Provides transfer and distribution of energy in the current levels between 400A and 6300A (With tin-plated aluminum busbar or copper busbar conductors.)
  • Busbar CR (Cast Resin Busbar): Provides transfer and distribution of energy in the current levels between 630A and 6300A (With tin-plated aluminum busbar or copper busbar conductors.)
  • Busbar KO-II: Provides transfer and distribution of energy in the current levels between 160A and 800A (With tin-plated aluminum busbar or copper busbar conductors.)
  • Busbar MK: Provides transfer and distribution of energy in the current levels between 100A and 225A (With tin-plated aluminum busbar or copper busbar conductors.)

SALIENT FEATURE OF EAE BBT ARE

  • EAE manufactures busbar systems as per ISO 9001 & 14001 & 27001 & OHSAS 18001 standards.
  • Each rating of EAE Busbars are tested according to IEC 61439-1/6 individually for all required type tests such as resistance to corrosion, verification of thermal stability of enclosures, resistance to mechanical impact, electrical resistance tests, impulse withstand voltage, fault loop impedance.
  • EAE KX compact busbars are UL classified & also certified by KEMA / DEKRA and are also tested and certified against fire resistance as per IEC 60331 and ISO 834.
  • EAE power busbar products are Green Guard certified.
  • Rated insulation and operational voltage are 1000 volt for medium and high current power busbar systems.
  • The conductors of KX busbar system is minimum 99.9% electrolytic copper or EC grade Aluminum. Conductors are tin-plated at joints in automated robotic inhouse plant with 20 steps of chemical treatments.
  • The insulation system of KX busbar consist of epoxy coating + polyester film insulation between conductors.